Bike Pumps

Never start a ride on soft tires and never finish one stranded with a flat. Bike pumps from ERIK'S keep your tires inflated to the right pressure before you roll and get you back riding when something goes wrong out on the road or trail. A high-quality floor pump makes hitting your target pressure fast and accurate at home, and a reliable portable pump ensures you are never more than a few minutes away from getting back on the bike wherever you are.

Sort & Filter

Filter

44 of 44 products

Select your store Change
Pick-up times vary by product, ranging from 1 to 10 days.
In Store Now
Products typically ready for pick-up within 1 day.
Remove all
Remove all

    Key Features to Look For

    Bike pumps split into two primary categories, floor pumps for home use and portable pumps for on-the-go inflation, and the right features vary between them.

    • Valve Compatibility  Presta and Schrader are the two main valve types found on bicycle tubes and tubeless setups. Presta valves are narrower and require a locking nut to be opened before inflation. Schrader valves are the same standard found on car tires. Most modern floor pumps include a dual-head or switchable design that handles both. Verify that any pump you buy works with the valve type on your tubes.

    • Maximum Pressure  Road bikes typically run 80 to 120 psi. Mountain bikes run much lower, often 25 to 35 psi for tubeless setups or up to 50 psi for tubed applications. Make sure your pump is rated for the pressure range your tires require. Floor pumps generally handle the full range. Many portable pumps max out at pressures that are sufficient for mountain biking but fall short for high-pressure road setups.

    • Gauge Accuracy  A pressure gauge that reads correctly and is easy to read makes a real difference in dialing in your pressure. Large-face analog gauges on floor pumps are generally accurate and easy to use. Digital gauges are precise but add cost and require batteries. Inline gauges on mini pumps are less accurate but still helpful for getting close to your target.

    • Tubeless Compatibility  Setting up a tubeless tire requires a high-volume initial burst of air to seat the tire bead against the rim. A standard floor pump works for some tire and rim combinations, but many setups benefit from a pump with a boost mode or an integrated air chamber that charges with normal pumping and then releases a large volume all at once. If you run tubeless, make sure your floor pump can handle the job.

    • Portability  Mini pumps compress small enough to fit in a jersey pocket or seat bag. CO2 inflators provide instant inflation from a small cartridge and are faster and lighter than any pump, but each cartridge is single-use and you need to carry spares. Hand pumps strike a middle ground between pack size and volume per stroke. For most riders, having a CO2 as a backup and a small pump for longer rides is the most practical approach.

    • Build Quality  A well-built floor pump with an aluminum barrel, comfortable T-handle, and solid valve head lasts for many years of daily use. Cheaper pumps with plastic components wear out faster and develop air leaks at the valve connection. For something you use before every ride, investing in quality pays off quickly.

    Complete Your Maintenance Setup

    Build a complete, ride-ready maintenance and flat repair kit:

    Expert Pump Advice at ERIK'S

    Getting the right pump means matching valve type, target pressure, and intended use to the right product. Our staff at ERIK'S can help you sort through the options and find a floor pump and portable solution that covers your riding. Come into any ERIK'S location and we will help you get the right setup so you are never caught without the tools to fix a flat or top off your tires before a ride.

    Shop bike pumps at any ERIK'S location across Minnesota, Wisconsin, Michigan, Illinois, Kansas, South Dakota, Iowa, and Illinois.