• Robert-Axle-Project-Adapter_Yes_Color--Size-154/167X12
1 1

Robert Axle Project Resistance Trainer 12mm Thru Axle

Robert Axle Project Resistance Trainer 12mm Thru Axle

$53.99
$53.99 $54.00
Sale Sold out
Shipping calculated at checkout.
Size:
SKU: EK5A17614 - 154/167x12
Not Available in any Other Stores Availability in Other Stores
  • Pick-Up in 2 Hours
  • Available within 4-6 Days, product is in the warehouse.
  • Available within 6-9 Days, product is in the warehouse.
  • Not available at this store.
Select Your State
Arizona
Illinois
Iowa
Kansas
Minnesota
Missouri
South Dakota
Wisconsin
Burnsville Your Store Dinkytown Your Store Eden Prairie Your Store Maple Grove Your Store Richfield Your Store St. Louis Park Your Store Vadnais Heights Your Store Coon Rapids Your Store Madison West Your Store Roseville Your Store Rochester Your Store Madison East Your Store St. Cloud Your Store Woodbury Your Store Eagan Your Store Minnetonka Your Store Eau Claire Your Store Bayshore Your Store St. Paul Highland Park Your Store Grafton Your Store Greenfield Your Store Minneapolis LynLake Your Store Kansas City LeaWood Your Store Kansas City Overland Park Your Store Deerfield Your Store Skokie Your Store West Des Moines Your Store Sioux Falls Your Store Liberty Your Store Central Warehouse Your Store Oak Brook Your Store Scottsdale Your Store
No available stores.
Delivery Availability
$15 Flat Rate Shipping on this item! This product is not available for shipping.
Available Not Available
Excludes AK and HI. This item is excluded from Free Shipping Promotions. Must be picked up in store.
View full details

PRODUCT DETAILS

PRODUCT DETAILS

Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.

  • For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
  • IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
  • Measure trainer at the widest setting and measure the bike frame width at the rear hub
  • The Robert Axle ends will extend 15mm past the frame on each side
  • Axle shaft and axle ends are machined from 7075 aluminum and hard anodized

ERIK'S EXTRAS

ERIK'S EXTRAS

ERIK'S Low Price Guarantee

If you find a lower price on an identical product within 30 days of purchase, ERIK'S will refund you the difference! Click here for further details.

Expert Staff

At ERIK'S, our expertly trained staff are ready to help you make the right purchase decision.

Reviews

Reviews